Maintenance Projector Lamp

Usually parts need special attention from a projector is Projector Lamp. The lamp has a limited lifetime use, usually expressed in hours. See the technical specifications of your projector. You can call Service Center / Shop from your projector may be able to provide complete information about price list projector lamp.

At the time the projector to work, this lamp out significant heat, so that each projector is equipped with a cooler fan to prevent overheating. At this point maybe it’s perfectly natural, the problem is when we have finished using the projector, the lamp needs to be cooled again in order to achieve the maximum working time, according to specifications.

Projector lamp life is influenced by several factors such as humidity, high heat, ventilation air inside the casing itself Projector. Once turned on, we have to cool the unit projectors for about 5 minutes, then turn off the Projector, and pull the electricity from the socket. Some brands such as Toshiba, Epson, etc., already have a Fast Cool Down facility, so the projectors can be immediately turned off.

If the projector died suddenly due to power failure / not through the process of cooling the cold down. Let first projector approximately 15 minute.Not to run out.

Consider the things about projectors which can inhibit the flow of incoming air, causing Projector become Overheat / Hot.

Keep Projector has a distance of about 60 cm from the surrounding objects once every 3 months to do the cleaning grille air vents in the casing projector. If the environment where they will be very dusty Projector, do more often.